The Modular Multi Load houses all the components required to make an acoustic panel or baffle. To construct it, an MDF board is inserted into the track as the base of the panel. Mineral infill or acoustic foam is then installed onto the MDF board. Lastly, the fabric is secured into the teeth of the track. Accessories such as the z-clip can be used to hang it on the wall, and the rhombus nut with threaded rod can be used to hang it on the ceiling as a cloud or baffle.
All prices in USD.
Download Specification Sheet PDF
The XL45S is a modular track with a square profile for 25mm substrate fixed onto a 9mm MDF board. This track can be mounted on the wall with a Z-clip or as a ceiling baffle with a rhombus nut and cable system.
The PL55S is a modular track with a square profile for 50mm substrate. This track can be mounted as a ceiling baffle with a rhombus nut and cable system.
2m per piece
20m per bundle
10 pcs per bundle
This signature tactile feature separates the authentic Fabrix tracks from counterfeit versions. This allows adhesives applied to the back of the track to have higher pull-out strength, and prevents excess adhesive from seeping out at the sides.
Fabric with high tensile strength can cause the tracks to warp during installation, which leaves an unsightly mark on the fabric surface. Fabrix tracks have a proprietary Anti-Warp feature that prevents imprinting the fabric surface.
Toxicity Emission Test
BS 6853 Annex B = R < 1.0
Fire Classification Test
EN 13501-1 = Class B s1, d0
Reaction to Fire Test
EN 13823 = s1, d0
EN 11925-2 = Fs ≤ 150mm in 60s