Side Snap | Square Edge

From: $170.00

The side snap range terminates the fabric before perimeters. The fabric sits tightly in between the teeth of the track. Adhesive tape along the track keeps the fabric from slipping out. The track features an anti-warp feature to prevent an imprint on the fabric, and also an anti-slip feature to adhere better to surfaces. Taller tracks have additional support structures added to reinforce stability.

All prices in USD.

Download Specification Sheet PDF


SS 15S

SS 15S is a side snap track with a square profile for a 12mm substrate.



SS 27S

SS 27S is a side snap track with a square profile for a 25mm substrate.



SS 53S

SS 53S is a side snap track with a square profile for a 50mm substrate.




2m per piece


20m per bundle
10 pcs per bundle



This signature tactile feature separates the authentic Fabrix tracks from counterfeit versions. This allows adhesives applied to the back of the track to have higher pull-out strength, and prevents excess adhesive from seeping out at the sides.


Fabric with high tensile strength can cause the tracks to warp during installation, which leaves an unsightly mark on the fabric surface. Fabrix tracks have a proprietary Anti-Warp feature that prevents imprinting the fabric surface.


Toxicity Emission Test
BS 6853 Annex B = R < 1.0

Fire Classification Test
EN 13501-1 = Class B s1, d0

Reaction to Fire Test
EN 13823 = s1, d0

Ignitability Test
EN 11925-2 = Fs ≤ 150mm in 60s

Sound Absorption Coefficient

Fabrix™ is tested to ASTM C423-09a Standards, which is the Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method. It covers the measurement of sound absorption in a reverberation room by measuring decay rate.

12mm Substrate

SAA = 0.40
NRC = 0.52

25mm Substrate

SAA = 0.67
NRC = 0.75

50mm Substrate

SAA = 0.99
NRC = 1.00

Installation Video of Fabrix™

This website uses cookies to ensure you get the best experience.